AIRLUX AHB682IX Mode D'emploi page 64

3. Install the v-flap and adaptor on the outlet. Put the cooker hood on the hook. See pic 3 & 4.
4. Afterwards, fix the outside chimney bracket on the outside chimney with 2 pcs ST4*8mm
screws, and be sure that the inside chimney can be adjusted the height in it freely. Install
the chimneys on the cooker hood. After adjusting the position, fix the body with safety
screws. Note: The two safety vents are positioned on the back housing, with a diameter of
6mm. See Pic 5 & Pic 6.
5. Adjust the height of the inside chimney to the position of the inside chimney bracket and
fix it by screws. See Pic 7.
Method 2 (Installation without hook):
1. The cooker hood should be placed at a distance of 65~75cm above the cooking surface for
best effect.
2. After decide the cooker hood height, measure the position of the holes for hanging the
hood and inside chimney bracket. Drill 4 pcs φ8 holes, they are for fixing intside chimney
bracket and the hood,and keep the hood level. The fixed position of the outside chimney
bracket is the highest place of outside chimney. Use 2pcs ST4×40mm screws to fix the
64