Changing System Setup - Honeywell 9000 Guide De L'utilisateur

Changing system setup

If the thermostat is reset to factory default
settings, you need to change the thermostat
settings to match your heating/cooling system.
Your contractor did this when the thermostat
was installed. Follow these steps to setup the
thermostat, or call your contractor to do it.
MENU.
1 Touch The thermostat displays a list
of options.
System
2 Select
displays the first screen of options that you
can change.
3 On each screen, make changes as needed
Next
then touch
Repeat this step until you have made all
changes. Tables on pages 48-49
explain the System Setup screens and
options.
4 When you have made all changes, press
Done
to save and exit.
Setup. The thermostat
to display new options.
System Setup
Touch the Help button
to see information
about screen options.
47
MENU
Next
33-00020EFS—03