Changing System Setup - Honeywell 9000 Guide De L'utilisateur

Changing system setup

If the thermostat is reset to factory default
settings, you need to change the thermostat
settings to match your heating/cooling
system. Your contractor did this when the
thermostat was installed. Follow these
steps to setup the thermostat, or call your
contractor to do it.
1 Touch MENU. The thermostat displays a
list of options.
2 Select System Setup. The thermostat
displays the first screen of options that
you can change.
3 On each screen, make changes as
needed then touch
options. Repeat this step until you have
made all changes. Tables on pages
20-21 explain the System Setup
screens and options.
4 When you have made all changes, press
Done to save and exit.
Changing system setup
Note:
Touch the orange Help button on any screen for more information.
System Setup Options (MENU > System Setup)
Screen Title
Language
Thermostat
installed in
Your thermostat
location
Your thermostat
controls
Your system type
Your forced air
heating system
type
Efficiency of your
heating system
69-2814EFS—07
Next to display new
Settings and Options
English/Français/Español.
Home/Business (Thermostat is used in a residential (default) or
commercial setting).
Touch THERMOSTAT button to display a screen where you can enter a
custom name using a keypad. If you have only one thermostat, you
can leave the name as THERMOSTAT. For business installations you can
check a box to display the thermostat name on the home screen.
Select Heating or Cooling or both (default).
Select Forced Air (default), Heat Pump, or Hot Water or Steam. Each
option offers different choices on the following screens.
Select how your forced air system is powered: Gas/Oil (default) or
Electric.
Select Standard Efficiency Forced Air (default) or High Efficiency
Forced Air.
20
System Setup
Touch the Help button
to see information
about screen options.
MENU
Next