Changing And Replacing Of The Tools; Tools And Accessories - WOLFF ALPHA Mode D'emploi

6.0 Changing and replacing of the tools

Tilt the machine onto the back wheels and rest it on the
handlebar.
All tools are fixed with 3 screws on the tool bracket.
Loosen and remove the screws with a 6 mm Alan key.
Check the grinding tool for wear and tear for the next
application.
Fix a new tool with the 3 screws on the tool bracket.
Adjust the different heights of the tools with the hand wheel
of the height adjustment. The motor axis of the grinder has
to be 90° level to the floor.
Different tools need different heights for the rubber sealing
around the discs.

7.0 Tools and Accessories

7.1 Tools
Disc holder for segments
1
Diamond segment, red . . . . . . . . . . . . . . .Item no. 33120
for removing and grinding (PU and epoxy)
coatings (can be used with 3 or 6
individual segments)
2
Diamond segment, silver . . . . . . . . . . . . . .Item no. 33846
for roughening and removing concrete
and screed and for grinding hardened fillers
(can be used with 3 or 6 individual segments)
3
PKD segment . . . . . . . . . . . . . . . . . . . . . .Item no. 34282
can be used with 3 or 6 individual segments
07/2005 Bodenschleifmaschine ALPHA, Artikel-Nr. 021341 ab Masch. Nr.
All manuals and user guides at all-guides.com
. . . . . . . . . . . . . . . . .Item no. 51207
Attention !
Never switch the motor on while the tools still touch the
floor.
Attention !
Before working on the grinder allow the motor to come
to a complete stand still and disconnect from the mains.
TIPP
Suction system TORNADO . . . . . . . . . . .Item no. 15756
to efficiently suck off fine dusts or grits,
0001/05uSTER
1
2
3
11