Setup Of Toggle Switches On The Motherboard; Jumpers - Gree D Série Guide D'utilisation

D Series Modular Air-cooled Scroll Chillers Owner's Manual

6.6 Setup of Toggle Switches on the Motherboard

Four bit toggle switches are used for indicating hardware address (1~16) of modules, with
module No. displayed in turn on the panel as Module 1, Module 2, ......, Module 16. Toggle switches
1, 2, 3 and 4 are binary code, with 1 for the lowest bit and 4 for the highest bit. Comparison drawings
are as follows (Caution: only in the condition of power supply shutoff can toggle switches be set):

6.7 Jumpers

When it is required to replace the main board, be sure the main board can match with the
applicable jumpers.
LSQWRF65M/D-M
LSQWRF80M/D-M
LSQWRF130M/D-M
LSQWRF160M/D-M
LSQWRF65M/NaD-M
LSQWRF80M/NaD-M
LSQWRF130M/NaD-M
LSQWRF160M/NaD-M
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
6 4202300106
7 4202300107
6 4202300106
7 4202300107
14 4202300114
15 4202300115
14 4202300114
15 4202300115
29
6
7
6
7
14
15
14
15