button to quit the menu page and go back to the previous menu.
Note: above Items display is dependent on unit model. If this Item is not existent for a
certain model, "NA" would be present on the display zone for corresponding Item.
(3) Error View
Used for checking the failure status of the system. Select the Error View and press the
Confirm to go to the pages as shown in the following drawings.
Press the Exit button to quit the page and go back to the previous menu. Press the Up or
Down selectionbutton to choose a needed module. When Present Error or History Error is
selected, press the Confirm to go to the following interface.
"XXXXXX" are possible failures as listed in the following:
Comp.1 HP Pro
Comp.1 OverLoad Pro
Fan1 OverLoad Pro
Sys.1 Dis.HighTemp.
C Water Flow Switch
Fan3 OverLoad Pro
Jumper Error
Comp.2 HP Pro
Comp.2 OverLoad Pro
Fan2 OverLoad Pro
Sys.2 Dis.HighTemp.
H Water Flow Switch
Comp.1 LP Pro
Comp.2 LP Pro
User Anti-Fire Pro
Dis.T Sensor1 Mal.
If the last line on the menu is followed with a "▼", more failures are available below. You can press
the Down selection button for reading more failures. If the first line is followed with a "▲", more failures
are available above. You can press the Up selection button for reading more failures. Press the Exit
button to go back to the previous menu. Only the lasted four failures are remained even if quantity of
history failures is more than 4.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
D Series Modular Air-cooled Scroll Chillers Owner's Manual