Reset (For Erasing Error) - Gree D Série Guide D'utilisation

D Series Modular Air-cooled Scroll Chillers Owner's Manual
◆ Version Information
Used for checking version number of software and hardware of the wired controller. On the
Main menu on the screen, select Version and press Confirm to go to the page as shown in the
following drawing.
Press Exit to quit the page and go back to the previous menu.

5.4 Reset (for erasing error)

On any interface, press Reset, the following page appears:
Press Exit to go back to the previous interface and press Confirm to select function as shown in the
following:
5.4.1 Erasing Error
Press Confirm to confirm it and go back to the previous page.
5.4.2 Relieve Discharge Temp. Sensor locking
Press Confirm to go to Code Entry page and enter correct password to go to the following page.
Press Confirm to confirm it and go back to previous page.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Clear Error
Remove Dis Sensor
Error is clear !
Temp. Sensor Error
Is Clear !
21
OK
OK