Operating Instructions; Starting The Dryer; Programming The Dryer Control - Dexter Laundry T-30 Manuel De L'utilisateur

NOTE: The installer must test the dryer for operation and instruct the user before leaving the installation.

STARTING THE DRYER

1. The display on the dryer control will show the required vend amount when in idle mode. Once the door is
opened it will prompt the user to add money. Load clothes into the dryer. Close the door completely.
2. Deposit coins equal to or greater than the displayed vend price. The display on the control will prompt the user to
choose a drying temperature.
3. Select the drying temperature by pressing the appropriate button for "high", "med" (medium) or "low". This will
turn on the red indicator light showing the selected temperature.
4. Press the "start" button to start dryer. This will turn on the green indicator light. The drying time purchased is
now displayed. The colon begins flashing to indicate that the timer is counting down.
RUNNING THE DRYER
-Opening the door will stop the dryer, but the timer will continue to count down. The dryer will restart, if time
has not expired, upon closing the door and pressing the "start" button.
-Selected temperature may be changed at any time (unless Temperature Pricing feature is activated).
-Running time may be extended by depositing coins and pressing the "start" button. Unless time has expired,
the controller will accept coins whether or not the original vend price is equaled.
-If time has run out, the dryer must be restarted as if it was at the beginning of drying the load, which requires
meeting or exceeding the vend price.
-Clothes should be removed promptly after the cycle is completed to prevent excessive wrinkling.
-Cool-down time (owner programmable) is always part of the cycle time to prevent damage from heat and is
purchased by the customer. For example, if the cool-down time is 2 minutes, then the last 2 minutes of the cycle
will have no heat.
The dryer control can be programmed to prompt the user for alternate vend prices, change dryer cycle times,
temperatures and many other options. This can be accomplished in two ways:
1. Manual programming utilizing the "Start", "High", "Medium" and "Low" buttons.
8514-234-001 REV N page 24

OPERATING INSTRUCTIONS

PROGRAMMING THE DRYER CONTROL