Using The Beertender - Krups BeerTender VB2158 Notice

SETUP AND MAINTENANCE
Install the BeerTender
n
To ensure that the BeerTender
is strongly advised:
Place it on a perfectly level and stable surface.
n
Choose a clean, well-lit area with an easily accessible electric socket.
n
Keep the appliance at a minimum distance (4 inches) from the stove as
n
shown in the diagram - fig. 2.
Keep the appliance at a minimum distance (2 ½ inches) from the walls.
n
Store the DraughtKeg
n
Make sure the BeerTender
n
Do not use the BeerTender
n
Do not place the BeerTender
n
these may melt or damage the casing.
Your BeerTender
n
when the ambient temperature is between 54°F and 86°F. At colder
temperatures, the appliance cooling system could be damaged. At
warmer temperatures, the cooling system will not be able to reach the pre-
programmed temperature - fig. 3.
wArNING!
out of direct sunlight. To obtain good cooling performance, never install your
machine in a room with an ambient temperature above 86°F.

USING THE BEERTENDER

Always hold the appliance by the bottom edge when lifting - fig. 4.
n
To obtain draught beer of optimal quality you should keep two basic factors
n
in mind, the temperature of the beer and hygienic conditions. Follow these
few simple steps for the ideal use of BeerTender
A new draught beer tube should be used with each DraughtKeg
A bag of 5 tubes is included with the BeerTender
additional beer tubes, please contact www.beertender.com or call
1-888-KrUPs.
otice_krups_beertender_nafta.indd 5
in an upright position in a safe place.
®
works correctly and efficiently, the following
®
at room temperature or in the refrigerator.
TM
is not exposed to direct sunlight.
®
outdoors.
®
on very hot surfaces or near open flames, as
®
uses a technology that delivers ultimate cooling results
®
To avoid overheating, always keep the BeerTender
SYSTEM
®
.
®
appliance. To order
®
English
appliance
®
.
Tm
5
10/08/10 11:49:11