Krups BeerTender VB2158 Notice page 11

No beer is being
dispensed.
You cannot close the
lid.
The BeerTender
appliance produces too
much foam when
dispensing beer.
Beer flows out too
slowly.
otice_krups_beertender_nafta.indd 9
The DraughtKeg
empty.
There is no
DraughtKeg
the BeerTender
appliance.
The BeerTender
appliance tap handle is
not correctly
installed/positioned.
The tap cover has
not been positioned
correctly.
The DraughtKeg
has not been correctly
installed.
The DraughtKeg
®
not reached the right
dispensing
temperature.
The DraughtKeg
has been shaken.
The tap handle is being
moved too slowly.
The tap handle is not
open all the way.
is Replace the
TM
DraughtKeg
new one.
Install a DraughtKeg
inside inside the BeerTender
TM
appliance.
®
Install/position the
®
tap cover correctly.
Position the tap cover
correctly.
Install the tap correctly.
TM
Ensure the draught
tube has been installed
completely and is not
preventing the lid from
closing.
has Allow the DraughtKeg
TM
to cool to the right
temperature. You can
rely on the temperature
indicator on the
control panel of your
BeerTender
Wait 4 hours before
TM
dispensing beer.
Firmly and quickly pull
the handle down and
forward as far as it
will go.
Open the tap
completely.
English
with a
TM
TM
®
TM
appliance.
®
9
10/08/10 11:49:12