Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Possible uses
The OpenStage PhoneAdapter gives users an additional U
Path communication platform. It can be used to connect up a second OpenStage phone or an
analog device to the telephone network.
Advantage:
Two devices can be connected to the phone network using a single line. No extra cables are ne-
cessary - extremely easy to install.
The PhoneAdapter requires its own external power supply unit.
Some system devices attached to the PhoneAdapter will require their own power sup-
ply unit, see below for details.
The following terminals can be connected to the PhoneAdapter:
• U
0 system telephone:
p
OpenStage 10 T
OpenStage 15 T
OpenStage 20 T
OpenStage 30 T
OpenStage 40 T
OpenStage 60 T and 80 T (require their own power supply unit)
optiPoint 500 (must be connected to U
Optiset E (must be connected to U
• Analog device:
Phone with MFV tone dialing (e. g. Euroset 5020 or a cordless phone such as Gigaset A160),
a Group 3 fax Gr. 3 or a modem.
Package contents:
• 1 OpenStage PhoneAdapter
• 2 connection cables (6-meter)
Installation notes
Use only the supplied cables to attach devices to the OpenStage PhoneAdapter.
The PhoneAdapter can be used in the following configurations only:
• One U
0 system telephone (U
p
• Two U
0 system telephones (U
p
• One U
0 system telephone and one analog terminal (U
p
It is not possible to operate two U
0 Slave output socket)
p
0 Slave output socket)
p
0 Master)
p
0 Master, U
0 Slave)
p
p
0 system telephones and one analog device.
p
0 or analog connection to the Hi-
p
0 Master, a/b)
p
Possible uses
9
Publicité
Table des Matières
