WF-3620/WF-3640
Start Here
1
Unpack
2
Turn on and configure
1
Caution:
Do not connect to your computer yet.
3
Install ink cartridges
Remove only the yellow tape from
each cartridge.
Caution:
Don't remove any other seals or
the cartridges may leak.
4
Load paper
French control
panel stickers
2
Read these instructions before using your product. The illustrations show the WF-3640, but the
steps are the same for the WF-3620.
Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de
configuración en español, consulte la Guía de instalación en epson.com/support/wf3620sp o
epson.com/support/wf3640sp (requiere una conexión a Internet).
Select your language, country, date, and time.
Note:
You can change these settings later using the product's
control panel. For more information, see the online User's Guide.
2
1
Note:
Do not open ink cartridge packages until you are
ready to install the ink. Cartridges are vacuum packed
to maintain reliability.
Note:
The cartridges included with the
printer are designed for printer setup and
not for resale. After some ink is used for
priming, the rest is available for printing.
Caution:
Don't turn off the printer while it
is priming or you'll waste ink.
Select the paper settings on the control panel.