Ametek Sorensen XDL II Série Mode D'emploi page 6

Fully Programmable via GPIB, RS232, USB or LAN
The programmable 'P' models incorporate a full bus interface permitting remote control and
readback via either GPIB (IEEE-488), RS232, USB or LAN.
The GPIB interface conforms fully with IEEE-488.2 and IEEE-488.1.
The RS232 interface uses a standard 9-pin D-connector and has a Baud rate variable from 600 to
19200.
The USB interface is compatible with USB 2.0 and USB 1.x.
The LAN interface is LXI version 1.2, Class C, compliant.
The XDL series II uses simple and consistent command structures which make programming
particularly easy regardless of which interface is used.
An IVI driver for Windows is included. This provides support for common high-level applications
such as LabView*, LabWindows*, and HP/Agilent VEE*.
All power supply settings can be controlled via the bus. Voltage and current can be set to a
resolution of 1mV or 0·1mA (main outputs). Actual voltage and current can be read back together
with the power supply status.
* LabView LabWindows is a trademark of National Instruments Corp. Agilent VEE is a trademark of Agilent Technologies inc.
15V 35V
XDL 35-5TP DC Power Supply
5A 3A
NUMERIC SET
VIEW V/I LIMITS
O/P 1
ON/OFF
_
+
+
35V
500mA
CONTROL
1 2
AUX
ON/OFF
+
15V 35V
XDL 35-5P DC Power Supply
5A 3A
NUMERIC SET
V OFF
VIEW V/I LIMITS
ON/OFF
_
+
_
+
15V 35V
5A 3A
MULTI-OUTPUT CONTROL
O/P 2
ON/OFF
_
+
35V
500mA
35V
500mA
+
5