Midea CyclonBlade MBL17HS Guide D'utilisation page 10

Care and cleaning
To Sanitize:
1. Follow Normal Cleaning instructions above.
2. Fill up container with half full water and adding 1 1/2 teaspoons of bleach
agent.
3. Push the lid completely in jar.
4. Turn machine at "ON" position, start from low, and increase the speed to high
slowly.
5. Run the machine on High speed for 30 to 60 seconds.
6. Turn off the machine, and allow mixture to stand in the container for an
additional 1 1/2 minutes.
7. Pour bleach mixture out. Allow container to air dry.
8. Do not rinse after sanitizing.
Lid, Measuring Cup
Separate the lid and measuring cup. Wash the parts in warm soapy water. Rinse
clean under tap water, and dry. Reassemble before use.
Motor Base
1. Unplug the power cord
Warning
• Electrical shock hazard.
• Disconnect power before cleaning machine.
• Failure to follow instructions can cause death or electrical shock.
2. Wash the outside surface with a damp soft cloth or sponge, which has been
rinsed in a mild solution of liquid detergent and warm water. Do not place the
motor base in water.
3. The centering pad can be removed for more thorough cleaning.
4. Thoroughly clean the switches so they work freely. They may become sticky
from use. Use a moistened cotton swab to clean machine. Immediately dry any
excess water.
5. Polish with a soft cloth.
9