Table des Matières
Publicité
and in-place
3. Make sure the Top latch and bottom latch are
totally closed. The Easiest way to do is to put
3. Insert the iPhone into the front of
2. Check seals are clean and in-place
the front at on a table and very rmly press
the case aligning the rear
on the rear case
all around the case, on the top and bottom.
1
2
3. Insert the iPhone into the front of
4. Top latch and bottom latch totally closed.
the case aligning the rear
Easy way to do is to put the front at on a table
3. Make sure your charge port door is closed
and very rmly press all around the case,
and your headphone plug is screwed in securely
the front of
on the top and bottom.
ar
4. Top latch and bottom latch totally closed.
Easy way to do is to put the front at on a table
and very rmly press all around the case,
on the top and bottom.
5. Make sure your charge port door is closed
and your headphone plug is screwed in securely
4. Submerge underwater,
weighing it down with a co ee cup
for an hour.
latch totally closed.
the front at on a table
3
4
30
insTaLL iPhone
1. Remove any screen protectors and clean iPhone with included cloth
2. Insert iPhone into case front, bottom first, aligning headphone port with
headphone jack cover
3. Snap on case back
4. Close charge port door and make sure jack cover is screwed all the way in
insTaLLaTion de L'iPhone
1. Retirez le protecteur d'écran, le cas échéant, et nettoyez l'iPhone avec le linge fourni
2. Insérez l'iPhone par le bas dans la partie avant de l'étui, en alignant la prise pour
écouteurs avec le couvercle correspondant
3. Emboîtez la partie arrière de l'étui
4. Fermez la porte du port de charge et vérifiez que le couvercle de la prise pour
écouteurs est vissé à fond
11
Publicité
Table des Matières
