Ferroli TES FC 3V Manuel D'utilisation page 44

5. Insert the cable of the rear cover into the installation box (cassette type). Use pan
head screws to fix the rear cover of the wired controller on the installation box
(cassette type); connect the flat cable that connects the front and rear PCBs.Use the
pipe temperature sensor cable to connect the sensor to the power board.
Pipe temperature sensor
Pipe temperature sensor cable
Cross recessed head screw
Front cover of
wired controller
● Do not overtighten the pan head screws, otherwise the rear
cover of the wired controller may deform and cannot be
levelled on the wall surface, which makes it difficult to install
or not securely installed.
EN
Rear cover of
wired controller
WARNING
19
Installation box
(cassette type)
Connection power
supply board