Installation Accessories - Ferroli TES FC 3V Manuel D'utilisation

11.2 Installation Accessories

Please check that you have all the following parts.
No. Name
1 Wired controller
2 Philips head screw, M4×25
3 Installation & Owner's Manual
4 Plastic support bar
Pipe temperature sensor
5
connection line
Prepare the following parts in the field:
No. Name
Installation box(cassette
1
type)
2 Shielded 3-core cable
Control cable (with the
3
null and live wires)
Small slotted screwdriver
4
Qty
1
Used to install the wired controller on the
2
electrical box
1
Used to install the wired controller on the
2
electrical box
To prevent cold/hot wind according to this
1
sensor, it is supposed to set C15 to 02.
Qty
General specifications of the installation box,
1
which is embedded into the wall
RVVP-0.5 mm
1
1 1.5 mm ×7, embedded into the wall
2
Used to install the slotted head screws and remove
1
the bottom cover of the wired controller
14
Remarks
Remarks
×3, embedded into the wall
2
EN