Basic Setting - Ferroli TES FC 3V Manuel D'utilisation

5 Basic Setting

Press
1 On/Off
conditioner starts operating;
Press
conditioner stops operating.
2 Mode
Press
selection
shown below:
Two-pipe cooling and heating scenario is set before delivery
from factory by default. The scenario can be changed based
on the parameter settings according to the actual need.
Scenario
Two-pipe cooling
Two-pipe cooling
and heating
Two-pipe cooling +
Auxiliary electric heater
Two-pipe heating
+ Auxiliary electric heater
Two-pipe cooling and
heating + Auxiliary
electric heater
Four-pipe
. The operating status LED turns on and the air
again. The operating status LED turns off and the air
The icon is displayed when the air conditioner is off.
to change the operating mode according to the order
Mode switch
Cool
Fan
Cool
Fan
Cool
Fan
Cool
Fan
Cool Fan
Cool
Fan
04
Heat
Auxiliary
electric heater
Heat + Auxiliary
Auxiliary
electric heater
electric heater
Auxiliary
Heat
electric heater
Heat
Heat + Auxiliary
electric heater
EN