Important - Solid State Logic Sigma Guide D'installation

82BMSGX1A Sigma Install 4_Print Layout 09/07/2013 11:05 Page 1
Introduction
Congratulations on your purchase of this Solid State Logic Sigma unit. Please be assured that it will provide you with
many years of reliable service while delivering the pristine quality you expect from any Solid State Logic product.
Sigma is a stylishly designed 2U rack-mountable unit, providing a remote-controlled analogue summing engine made
possible by Ctrl SuperAnalogue technology. Sigma works by grabbing the automation streams from your DAW (over a
standard Ethernet cable) and using them to drive the analogue signal levels.
The unit front panel offers LED signal level and routing indications, customisable user buttons and a level control. It
also offers a sturdy power switch, headphone socket and an iJack input to easily connect an MP3 player.
In order for Sigma to integrate with your DAW, ipMIDI software must be installed on your DAW computer. In
addition, configuration of Sigma will require the use of a standard internet web browser (Chrome, Firefox,
Safari, Internet Explorer, etc.). Please go to the Sigma page on the Solid State Logic website to register your
unit, download the necessary software and download a copy of the full Sigma User Guide which will guide you
through setup.
The Solid State Logic home page is at:
From the Sigma page of our website you will also find links to the Frequently Asked Questions (FAQ) area for
any questions you might have or to contact our Technical Support staff.

IMPORTANT

www.solidstatelogic.com
EN
DE
ES
FR
IT
JP
1