Setting The Clock - Zehnder ComfoSense CH Manuel

6. Press or
period. The following day period can
be chosen:
■ MON
■ TUE
■ WED
■ THU
■ FRI
■ SAT
■ SUN
■ MO – FR = Mondays to Fridays;
■ SA – SU = Saturdays and
■ WEEK
7. Press OK to confirm. START will
appear. The hour indicator is
blinking.
8. Press or
9. Press OK to confirm. The minute
indicator is blinking.
10. Press or
minutes.
11. Press OK to confirm. END will
appear. The hour indicator is
blinking.
12. Press or
13. Press OK to confirm. The minute
indicator is blinking.
14. Press or
minutes.
15. Press OK to confirm. The text says
SET. The fan speed indicator is
blinking.
16. Press or
speed. The following fan speeds can
be chosen:
■ AWAY
■ LOW
■ MED
■ HIGH
17. Press OK to confirm. The text says
SAVED for 2 seconds. After this SET
is blinking. The next program number
is visible.
18. Press MENU to return to the main
menu.
Or go back to step 4 to set another
22 - EN
to choose the day
= Monday;
= Tuesday;
= Wednesday;
= Thursday;
= Friday;
= Saturday;
= Sunday;
Sundays;
= Every day of the
week.
to choose the hour.
to choose the
to choose the hour.
to choose the
to choose the fan
= Very low;
= Low;
= Medium;
= High;
program.
Deleting a program
1. Press MENU.
2. Press or
3. Press OK to confirm. SET is blinking.
The program number is visible.
4. Press or
program to delete. PROG is blinking.
The program number is visible.
5. Press OK seven times without
changing anything. The text says
BACK.
6. Press or
7. Press OK to confirm. The text says
DONE for 2 seconds. SET is blinking.
The next program number is visible.
8. Press MENU to return to the main
menu.
Or go back to step 4 to delete
another program.
The numbering of the programs
will always be sequential.
Programs with a higher number
will shift back one place to fill
the gap of the deleted program.
Show current running program
1. Press OK. The text says SHIFT for 8
seconds.
2. Press AUTO MAN before the text
SHIFT disappears. The text says
NOW and displays the leading
program number below the text.
When no week program is active
two lines are displayed instead of a
program number.

2.8 Setting the CLOCK

1. Press MENU.
2. Press or
3. Press OK to confirm. The day
indicator is blinking.
4. Press or
The following days can be chosen:
■ MON = Monday;
■ TUE = Tuesday;
to choose PROG.
to choose the
to choose DEL.
to choose CLOCK.
to choose the day.