Using The Comfoconnect Lan C - Zehnder ComfoConnect LAN C Manuel

2

Using the ComfoConnect LAN C

# Description
1 LAN connection (RJ45) to network.
2 1st connection to the ComfoNet network
(e.g. ventilation unit, ComfoSense C or ComfoSwitch C),
incl. +12V DC power supply of the ventilation unit.
3 2nd connection to the ComfoNet network
1
(e.g. ventilation unit, ComfoSense C or ComfoSwitch C),
incl. +12V DC power supply of the ventilation unit.
4 Factory reset button for implementing the factory settings.
2
5 Status of indicator LEDs.
6 Reset button for restart.
The 2nd connection can be used as the so-called 'feed-through/chain' loop-through
1
connection that includes the +12V DC power supply for the other nodes on the ComfoNet.
The 'Factory reset' button is only accessible by inserting a pin or paper clip into the little
2
hole.
1
2
3
4
5
6
EN - 13