MiFi 7000 Guide Utilisateur page 64

How do I reset the Access Point and Router settings back to factory settings?
To reset the access point and router settings, follow these steps.
➊
Connect to the MiFi Admin Website
Settings > MiFi > Backup and Restore.
➋
The Backup and Restore page has a Restore to Factory Defaults button. This button resets all
Access Point and Router settings to their factory default values. All existing settings are lost.
(See Backup and Restore on page 71).
No service is available.
Reorient your device. If you are inside a building or near a structure that may be blocking the
•
signal, change the position or location of the device. For example, try moving your device
close to a window.
You are outside your coverage area, or there may be a problem with your account. Check
•
with your network operator.
The MiFi has no power or the device screen does not display when the
power button is pressed.
Make sure the battery is properly seated in the device.
•
Make sure the battery is fully charged. Plug in the AC charger for at least 3 hours.
•
I forgot my Wi-Fi Password.
Tap Wi-Fi Name/Password to display your Wi-Fi Name (SSID) and Wi-Fi Password.
•
I forgot my MiFi Admin website Password.
Select Help > MiFi Admin website to display the MiFi Admin website URL and Admin
•
Password.
(http://my.MiFi or http://192.168.1.1) and go to MiFi
60