Getting Started; Filling The Water Reservoir - Somnetics Transcend Guide Rapide

GETTING STARTED

Important: It is important to place the Humidifier on a firm, level surface near your bed. It is
recommended that you not place the Humidifier on a surface that could be damaged by water.
The Humidifier should be on a level that is lower than your sleeping position to help prevent
condensation in the mask.

FILLING THE WATER RESERVOIR

1. R emove the Water Reservoir from the
Humidifier by pulling outward (Image a).
2. Remove the Fill Cap (Image b) and carefully
fill the Water Reservoir to the MAX fill line
with distilled water (Image c).
3. Replace the Fill Cap and carefully return
the Water Reservoir to the Humidifier body
(Image d).
STARTING AND ENDING THERAPY
1.
Attach the air supply tubing (hose) to the
Humidifier. Be sure your mask is securely
attached to the opposite end of the air
supply tubing (Image e).
Note:
Standard 6 foot air tubing is supplied
with the Transcend Sleep Apnea Starter
System. If you have been using the PAP device
without the Humidifier, the universal hose
adapter must be removed from the 6 foot air
tubing prior to use.
TRANSCEND HEATED HUMIDIFIER QUICK GUIDE
a
b
c
d
e
• ENGLISH • PAGE 4