7
Preparation for long term storage
Maintaining proper functioning and preventing
the growth of bacteria in the LifeStraw® Mission
during storage is easy to do with a simple
disinfection procedure.
Step 1: Rinse the roll bag with clean water.
Step 2: Fill the roll bag with a solution of two
(2) drops of household bleach to one (1) liter of
warm water.
Step 3: Close the blue safe water tap and open
the red water tap – let the water flow through the
red water tap into the sink until the unit is empty.
Step 4: Air dry the roll bag, disconnect the hose
and leave both taps open before placing the
entire unit in storage.