Indicator Light And Alarm Sounds - yeedi K600 Manuel D'instructions

Indicator Light
The robot is charging�
The robot has a problem�
The robot has low battery�
The robot is cleaning�
Alarm Sounds
If the robot detects a problem, it emits alarm beeps and the AUTO Mode Button flashes RED or glows RED�
Flashing RED:
Alarm Sound
Two Beeps
Three Beeps
Four Beeps
Status
Problems
Anti-Collision Bumper Malfunction
Anti-Drop Sensors Malfunction
Low Battery

5. Indicator Light and Alarm Sounds

AUTO Mode Button
Flashes BLUE
Flashes RED or glows a continuous RED
Glows a continuous RED
Glows a continuous BLUE
Check the Anti-Collision Bumper for debris and remove
the debris�
Clean Anti-Drop Sensors as described in section 4
Maintenance�
Manually place the robot on the Charging Dock to
charge�
Solution
21
EN