Mounting; Orientation; Rigging - Chauvet DJ SCORPION STORM FX RGB Manuel D'utilisation

Mounting

Orientation

Rigging

Scorpion Storm FX RGB User Manual Rev. 4
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The Scorpion Storm FX RGB must be mounted in a position that includes planning for
safe laser usage. In addition, make sure adequate ventilation is provided around the
product.
• Before deciding on a location for the product, always make sure there is easy access
to the product for maintenance and programming.
• Make sure that the structure or surface onto which you are mounting the product can
support the product's weight (see the
• When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, such as an elevated platform or a truss.
• When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracketed has a 13-mm hole, which is appropriate
for this purpose.
• The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually. Using
tools could damage the knobs.
Mounting Bracket
Technical Specifications).
Mounting Clamp
Safety Cable
Surface
Supports
Bracket
Adjustment
Knob x2
Page 15 of 65