Eddy TBE3 Manuel D'instructions Et D'entretien page 14

To prevent potential injuries, a cover is placed over the chisels. To reach or store chisels, lift the cover. When
finished, lower the cover back to its original position
Choose the chisel for the job to execute. There are 3 sizes of chisels; 1", 2" and 3".
Most tiles can be removed using chisel sizes 1" and 2". The 3"chisel is mostly used to remove mortar.
NOTE:
See Fig. 8.
Insert the chisel as shown in the following Fig. 12 to 14.
•
Tilt the tool backwards.
•
Insert chisel while holding back the chuck.
•
Turn the chisel until the chisel groove is engaged before releasing the chuck..
•
Release the chuck.
• If necessary, grease the chisel with the grease that comes with the tool so that the chisel can
be inserted more easily
Picture showing the chisel cover
Page | 14