Unpacking - Eddy TBE3 Manuel D'instructions Et D'entretien

Unpacking

•
Open the box and retrieve the Tile Breaker from it.
•
The Tile Breaker is in a folded position as shown in the figure below.
•
Place the wheels on as shown in the figure.
•
To prevent injuries, a safety cable is locking the handle in the folded position.
•
To unfold the handle, open the Cable snap and unfold the handle by lifting it upwards until the hinge
anchors are aligned. Insert the hinge pin until the spring ball locks in place as shown in the figure.
WARNING When lifting the handle, make sure that nobodies hand or other body part is touching the handle
latching joint.
1) Place the wheel
over the wheel
axle
Page | 11
3) Insert the lock-pin and
bend over the legs
2) Place the
ring over
the wheel
axle