Kohler K-2313 Guide D'installation page 4

3. Attach the Tie Bar to the Brackets
Insert the 1/8" bolts through a washer. Then insert the 1/8" bolts through the bracket holes closest
to the wall. Spin the toggle wing nut onto the tip of each bolt.
Place the tie bar on the brackets, aligning inner holes of tie bar with holes in front of brackets. Bolt
tie bar down using the flush head bolt, washer and nut.
1012579-2-B
Toggle
Wing Nut
1/8" Bolt
Bracket
Flush
Head Bolt
Washer
Nut
4
Tie Bar
Kohler Co.