What's In The Box; What You'll Need - Sonos Mount Guide De Démarrage Rapide

Sonos Mount
• The easy-to-install mount for Sonos One and Play:1
• Holds speaker normally, upside-down, or even horizontally
• Speaker can pivot up to 45 degrees
• Allows access to ports, buttons, and touch controls
• Cleanly routes your speaker's cables
Important: This mount is intended for use only with Sonos One and Play:1.

What's in the box?

• Mount
• Wall bracket
• Top cap
• Mounting kit
Note: Sonos speakers sold separately.

What you'll need

• Pencil
• Level
• Phillips-head screwdriver
• Power drill (if needed for installation location)
WALL MATERIAL
Wood stud
Drywall (no stud)
Hard wallboard or
double board
Plaster
Concrete or Brick
PRE-DRILL
1/8" / 3mm bit
5/16" / 8mm bit
5/16" / 8mm bit
5/16" / 8mm bit
5/16" / 8mm bit
USE WALL ANCHORS USE SCREWS
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
1