Basic Operation - Uline H-1024 Manuel

1. Protect your eyes and ears.
a. Wear safety glasses with side shields.
b. Wear hearing protection.
c. Ensure that anyone in the vicinity wears safety protection.
2. To prevent accidental injuries, never place a hand or any other body part in
the staple clinching area or adjustment window.
3. Never point the stapler towards you or anyone else.
4. Always handle the stapler with care. Never pull the trigger unless stapler is
ready for operation.
5. Check and replace any damaged or worn components on the stapler.

BASIC OPERATION

1. Insert the staples into the stapler following the
loading instructions.
2. Grasp the handle with one hand on box in line
with the desired staple location. There is a small
projection on either side of the magazine seat as an
aid in locating the position of the staple.
3. For strongest closure, use staples close to the ends
of the box.
Figure 8
PAGE 4 OF 21
OPERATING INSTRUCTIONS
WARNING
CLEARING A JAM
1.
2. Insert needle nose pliers or screw driver to clear jam.
3. Slowly release pusher back to position.
Figure 9
Pull pusher back and rotate to a locked position.
(See Figure 8)
(See Figure 9)
0421 IH-1024