Clinch Adjustment; Depth Adjustment - Uline H-1024 Manuel

CLINCH ADJUSTMENT

Loosen securing nut closest to body. Turn adjustment
nut clockwise to loosen clinch. Turn adjustment nut
counter-clockwise to tighten clinch. After adjusting,
tighten securing nut. (See Figure 5)
Figure 5
PAGE 3 OF 21
SAFETY INSTRUCTIONS CONTINUED

DEPTH ADJUSTMENT

1. Loosen front 2 screws with a 4 mm Allen w rench.
(See Figure 6)
2. Push the body up and adjust to the desired depth.
(See Figure 7)
Figure 6
Figure 7
0421 IH-1024