SAFETY INSTRUCTIONS
Read these instructions carefully and keep them with you so
that you can consult them later on.
Always completely unwind the cord.
■
Connect the cord to a 10/16A outlet.
■
If you have to use an extension cord, you must use a model
■
equipped with a ground connection and wires of section greater
than or equal to 0.75mm².
Never put the unit into water or any other liquid.
■
Do not embed the unit.
■
During operation, the unit can move slightly on the work surface
■
due to vibrations.
Always thoroughly clean the parts used for preparation after
■
each use.
Keep an eye on children to make sure that they don't play
■
with the unit.
People (including children) who are not able to use the unit
■
in full safety, either due to their physical, sensorial or mental
capacities, or due to a lack of experience or knowledge, must
not use the unit without the surveillance or instructions of a
responsible person.
Keep the cord out of reach of children.
■
Make sure that the wiring of your electrical system is compatible
■
with that of the unit. It is recommended that you connect the
unit to an installation including a residual current system having
a breaking current not exceeding 30mA.
These units are not intended to be operated by means of an
■
exterior timer or by a separate remote control system.
Place the unit on a at surface.
■
Never put your unit on a hot surface or near a ame.
■
Never leave your unit plugged in without using it.
■
Never let the unit operate without surveillance.
■
Don't operate the unit in a con ned space.
■
Never put the unit on another unit.
■
Don't use metallic accessories in the vat to avoid scratching it.
■
Never put any part of the unit in a microwave.
■
For your safety, it is recommended that you never use or leave
■
your unit in an area exposed to foul weather and moisture.
Never use the unit for any purpose other than its intended use.
■
If your unit is damaged, do not use it and contact the
■
after-sale service.
52 52 52