Technical Specifications - Thrustmaster 2IN1 SOUND SYSTEM Manuel De L'utilisateur

1. Remove the battery cover.
2. Place rechargeable batteries as indicated.
3. Close the battery cover.
5. Turn the stand upside down.
6. Raise the holder.

TECHNICAL SPECIFICATIONS

Total power output
Frequency response
Battery working time
4. Take out the ST signal connector.
7. Place PSP on the stand.
8. Connect Line In connector (1) to PSP earphone
9. Connect speakers connector to speaker jack (2)
10. Connect PSP's switching power cord to DC IN
11. Press power button (4).
2x2 watts
20 – 20,000Hz
3h
2/4
jack, MP3 player, CD-player...
on the left side of the stand.
jack (3) to recharge batteries and/or use with DC
current
The POWER LED comes on (blue).