Cycle Information; Retrieving Cycle Information Using The Touchscreen - SciCan HYDRIM L110w G4 Manuel De L'utilisateur

5. Instructions for Use –
5.29 Storing and Retrieving Cycle Information
The HYDRIM L110w G4 has an internal Data Logger capable of storing all the data
on every cycle, whether successful or incomplete, for the lifetime of the unit. You can
access this information through the touchscreen, through the web portal or by using a
USB storage device.

Retrieving cycle information using the touchscreen

1. From the main menu, press the USB icon.
2. The unit will record up to the last five successful cycles and the last five incomplete
cycles.
If you select a cycle from the list, it will display cycle information in a format similar
to how it would be printed.
3. Use the arrow keys to scroll through and read.
NOTE: Regardless of whether you have a USB storage device attached to the
unit or not, you can always see the last five successful cycles and the last five
incomplete cycles.
Use the HYDRIM L110w G4 web portal to access all the cycle information stored
on your Hydrim from your computer. To connect your HYDRIM see section 5.23
Connecting to a Network.
27