Sorting Loads; Grouping Similar Items; Loading The Dryer; Check The Lint Filter Before Every Load - LG DLEX2450 Série Mode D'emploi

Sécheuse de vapeur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Following are instructions for starting and using your new dryer. Please refer to specific sections of this
manual for more detailed information.
w WARNING: To reduce the risk of fire, electric shock, or injury to persons , read this entire manual,
including the Important Safety Instructions, before operating this dryer.

SORTING LOADS

Fabric Care Labels
Most articles of clothing feature fabric care labels
that include instructions for proper care.
Fabric Care Labels
Tumble
dry
Dry
Normal
Gentle/
Do not tumble dry
delicate
Heat
setting
High
Medium

Grouping Similar Items

For best results, sort clothes into loads that can
be dried with the same drying cycle.
Different fabrics have different care requirements,
and some fabrics will dry more quickly than
others.

LOADING THE DRYER

wWARNING:
of fire, electric shock, or injury to persons when
using this appliance, follow basic precautions,
including the following:
• Check all pockets to make sure that they are
empty. Items such as clips, pens, coins, and
keys can damage both your dryer and your
clothes. Flammable objects such as lighters
or matches could ignite, causing a fire.
Failure to do so can result in fire, explosion,
or death.
• Never dry clothes that have been exposed to
oil, gasoline, or other flammable substances.
Washing clothes will not completely remove
oil residues. Failure to obey this warning can
result in fire, explosion, or death.
Loading Tips
• Combine large and small items in a load.
• Damp clothes will expand as they dry. Do not
overload the dryer; clothes require room to
tumble dry properly.
• Close zippers, hooks, and drawstrings to
prevent these items from snagging or tangling
on other clothes.
Permanent Press/
wrinkle resistant
Do not dry
(used with
do not wash)
Low
No heat/air
To reduce the risk
CHECk THE LINT FILTER
BEFORE EVERY LOAD
Always make sure the lint filter is clean before
starting a new load; a clogged lint filter will
increase drying times.
To clean, pull the lint filter straight up and roll any
lint off the filter with your fingers. Do not rinse or
wash the filter to remove lint. Push the lint filter
firmly back into place. See Regular Cleaning for
more information.
Always ensure the lint filter is properly installed
before running the dryer. Running the dryer with
a loose or missing lint filter will damage the dryer
and articles in the dryer.
Lint Filter
31

Publicité

Chapitres

Table des Matières
loading

Table des Matières