Battery Replacement - METRICA 60274 Caractéristiques Techniques, Instructions De Montage Et De Service

5.2.2 Such value can be changed to your intended value by depressing the plus key or minus. key.
Depress the select key to return to the state of measurement. if the second limit AL2 is less than
the first limit AL1 the setting is invalid and the factory setting for AL1 and AL2 are restored to
AL1=13 and AL2=18 automatically.
6 - Considerations
6.1 This instruments is of very high input resistance.
Every parts have good insulation. Please keep it in a dry, dustproof place.
6.2 The measurement results may different.
If talking the measurement from different directions of the surface. That is because water in the material
is not distributed evenly

7 - Battery replacement

When the battery symbols appears on the display, it is time to replace the battery. Remove the batteries and
install new ones paying careful attention to polarity.
App1 : Code table for a pin code
Code Materials
cd00 Abies grandis, Acer macrophyllurn, Maple, Acer saccharum, Pine(scots), yellow Pine, Dalbergia latifolia, Dipteroearpus
zeylanicus, Eucalyptus microcorys, Fraxinus excelsior, Cupressus spp, Pinus contorta, Pterygota bequaertii, Quercus robur,
Pinus sylvestris, Balsa, Boxwood (maracaibo), red Gum(American), Gum spotted, Gurjun, Birch, Cypress(African) Karri,
Oak(European), Oak(Japanese), black Poplar, Redwood(Baltic European), Rosewood (Indian), Pine (lodgepole), Tallowwood,
Walnut (American), Kapur
cd01 Araucaria bidwilli, Eucalyptus crebra, Eucalyptus saligna, "Flindersia brayleyana, Fraxinus Americana, Intsia bijuga, Podocar-
pus dacrydioides, Sequoia sempervirens, Pinus pinaster, Gum (southern), Mahogany (west Indian), Douglas fir, Maple
(queensland), red (light or dark) Meranti, white Meranti, Redwood (Californian), Walnut (new guinea), white Pine (new Zealand),
Araucaria angustifolia
cd02 Distemonanthus henthamianus, Jarrah, Endiandra palmerstonii, Erythrophleum spp, Abies alba, Fagus sylvatica, Grevillea
robusta, Juglans regia, Larix cieciduas, Larix occidentalis, Podocarpus spicatus, Picea abies, Pinus caribaea, Pinus nigra, Pinus
paliustris, Pinus ponderosa, Pinus radiata, Taxus baccata, Thuja plicata, Tsuga heterophylla, red Cedar (western), Chestnut,
Greenheart, Hemlock (western), Larch ( European), Larch (Japanese), Queensland walnut, red Seraya, Spruce, Silky
oak(African), Silky oak( Australian), Pine (Corsican), Pine, radiata, Walnut(European), Walnut, (queensland), Whitewood, Yew,
Pine (ponderosa), Stringybark, Oak (tasmanese)
cd03 Khaya senegalensis, Podocarpus totara, Quercus cerris, Ulmus American, Ulmus procera, Ulmus thornasii, Afzelia, Kauri( new
Zealiand), Lime, Elm (English), white Elm, Matai, Oak( Turkey), Pyinkado
cd04 Acer pseudoplatanus, Caryn glabra, Sycamore, Cassipourea elliotii, Dipterocarpus (keruing), Teak, Cordia alliodore, Larix
occidentalis, Pterocarpus soyauxii, Hickory, Padauk( African)
cd05 Afrorrnosia elata, Diospyros virginiana, Gonyslylus macrophyllum, Pterocarpus indicus, Afrormosia. Amboyna, Basswood,
Coachwood Persimmon
cd06 Calophyllum brasiliense, Guarea cedrata, white Guarea
cd07 Abies procera, Agathis robusta, Betula penclula, Croton megalocarpus, Prunus aviurn, Agba, Birch ( European), Cedar (west
Indian), black Guarea. Kauri (queensland), Walnut( African), Cherry (european)_ Utile
cd08 Chipboard,Paper
cd09 Building, Wall,Concrete
warning
Dispose of the device properly, according to the national regulations of waste disposal.
Protect device from unauthorized persons it.
METRICA S.p.A. - S. Donato Milanese - Milano - Italy
Imported and distributed by:
Moisture meter
art 60274
This moisture Meter is small in size, light in weight, easy to carry. Although complex and advanced, it is conve-
nient to use and operate. Its ruggedness will allow many years of use if proper operating techniques are
followed. Please read the following instructions carefully and always keep this manual within easy reach.
1 - Features
Be a powerful and versatile instrument for measuring and diagnosis dampness in building and building
materials. This product enables building surveyors and other practitioners to measure moisture levels of
building elements such as wall, floors and other building materials simply by switching between the two
different models of operation. In this way, a detailed understanding of the moisture condition of the property
can be obtained.
Digital display gives exact reading with no guess or errors while a color coded light (led) indicates the moisture
condition of the material. This combined presentation of moisture measurement helps the user to map the
extent of problem and monitor changes in condition precisely and reliably
Alarm values can be set by user
Automatic power off to conserve power
Can communicate with pc computer for statistic and printing by the optional cable and software for RS232C
interface
2 - Specification
• Display 4 digits, 10 mm LCD
• With color coded LED indication: Green LED represents a safe , air dry state
Yellow LED represents a borderline state
Red LED represent damp state.
• Measurement range: 0 – 80% (when code = cd01 in a pin mode)
• Measurement codes: 10 codes in a pin mode
20 codes in a search type
• Accuracy: +/- 0.5%n or +/-0.5%
• Power supply: 4X1.5 AAA size (UM-4) battery
• Power off: 2 models
- Manual off at any time
- Auto power off after 5 minutes from last key operation
• Operating conditions:
- Temperature: 0-50 c°
- Humidity: below 90% RH