Titan PLC 456 000100 Notice D'installation page 26

Failure to comply with the following safety instructions, in addition to errors in
handling the device, can result in serious injuries.
PLC / DCR / SCR
Be informed!
Read the operating manual carefully before using the device
Protect yourself!
Always wear eye, face and hand protection (cut-resistant gloves)
when working.
Attention!
Strap flies outward!
When cutting the strap, hold the top part firmly and stand to the
side.
Attention!
The lower part of the strap will fly outward.
Attention!
Strap can break!
The strap can break during tightening! Do not stand in the path of
the strap. Make sure that no one else is in the working area.
Caution!
Danger of crushing!
Do not insert fingers into the pulley area.
Caution!
Strap only objects to be packed!
Make sure that no hands or other body parts are between the strap
and the goods to be packaged.
Use only original TITAN replacement parts!
The use of parts other than original TITAN replacement parts will
void the warranty and all liability.
Use only lifting gear that complies with the safety regulations!
H456 EU 07/10
26 / 71