Unpacking; Setting Up - IKA-WERKE LR 2000 V Mode D'emploi

Examples of Application
- Manufacture of creams, lotions, emulsions, preparation of liposome in the pharmaceutical and cosmetic fields
(lipstick, sun protection creams, eyeliner etc)
- Working in solids like calcium carbonate, talcum, titanium oxide and others into liquid polymers
- Working additives and solid polymer compounds into mineral oils
- Dispersing and defibrating solids and fibres in liquids and polymers
- Manufacturing milk products and dietary foods
- Extracting enzymes from biomass
Range of use
- Laboratories
The protection for the user is not ensured no more, if the equipment with accessories is operated, which are supplied or are
not recommended not by the manufacturer or if the equipment in not correct use is operated against the manufacturer default.

Unpacking

Unpack
- Please unpack the device carefully
- In the case of any damage a fact report must be set immediately (post, rail or forwarder)
Delivery scope
Der IKA-Laborreaktor wird als komplett montierte Einheit geliefert. Zubehör wie ULTRA-TURRAX, Temperaturmessgerät,
Reaktorgefäße und weitere lieferbare Zusatzgeräte werden separat geliefert.

Setting up

The IKA-Laboratory reactor system has been supplied in a basic
version ready for operation and can be direcly set up on a level
work bench.
Inserting the reactor vessel:
• Loosen clamping lever on telescopic stand
• Push stirrer drive upwards by hand (supported by a protective
gas spring)
• Insert reactor vessel into instrument base
• Open container collets via crank handle
• Press stirring drive down
• Fix telescopic stand with clamping lever in this position
• Close container collets
• Close all three clamps and tighten them
The stirrer drive is firmly fitted to the stirring shaft and is a per-
manent part of the IKA-laboratory reactor. Only the reactor ves-
sels are changed for the respective operations.
12