Omcan CE-CN-G15M Manuel D'instructions page 11

7. Converting the Gas Regulator.
a. Remove the converter cover from the regulator. Use a 7/8" spanner.
b. Pull-out the converter from the cover.
c. Position of converter when using Propane (L.P.)
d. Install the converter cover to the regulator.
Note: The arrow in the regulator indicates the flow direction of the gas.
8. Re-install the U burners.
9. Check leakage and re-install other parts.
10. Ignite the pilot burner and check flame state.
11. Turn the knobs to "High".
11
Installation