TP-Link RE200 Guide Rapide page 7

dead zone.
Wait for the extender to reconnect and the 2.4G/5G LED should turn
green. If not, relocate it closer to the router to achieve better signal
quality.
Router
Both extended networks share the same Wi-Fi passwords as those of your host
networks, but may have different wireless network names if you have customized
them during the configuration.
To minimize wireless interference, place your extender in an open
space area, away from other bluetooth devices or radioactive devices
such as cordless phones, microwaves, etc.
Enjoy!
Option2: Using WPS(Wi-Fi Protected Setup)
Important:In order to use this option, your router must support WPS.
① Power on
② Connect
A. Press the WPS button on your router.
Host Network
Ideal Extender Placement
Keep away from
Extended Network
Plug the extender into a power
outlet near your router, and wait
until the Wireless LED
solid green.
5
English
Clients
is lit and