Maintaining Your Water System; Changing The Filter - Kinetico PREMIER Série Guide D'utilisation

Maintaining Your Water System

Your Kinetico water system is engineered to provide you with quality water
without requiring extensive maintenance. However, some routine maintenance
is necessary to keep your system working properly.

Changing the Filter

Your Kinetico system uses an in-line filter to remove solid material from the
inlet water supply. Periodically, the filter cartridge will require replacement.
This should occur when the water pressure in the home begins to gradually
decrease. The frequency of the filter change is determined by the amount of
water used and the solid material content of your water supply.
Procedure
1. Turn off the feed water to the filter by turning the by-pass valve
PASS position*.
2. Slowly turn the handle on the pressure relief valve
position**. Allow at least one minute for system to depressurize and to
minimize spillage.
Open
2
Closed
10
5
Off
On
3
1
1
to the BY-
to the OPEN
2
4
6