Important
C
If the USB port of the computer does not
supply enough power capacity (500 mA), disable
the USB quick charge function in the menu of
the Pocket Memo and recharge.
3.3
Insert and eject the memory card
The Pocket Memo operates with a SD
(SecureDigital) memory card and supports
SDHC cards with storage capacities of up to 32
GB.
To insert a memory card:
1
Locate the memory card slot on the top
back side of the Pocket Memo.
2
Slide the memory card into the slot. A small
illustration under the memory card slot
indicates the correct orientation.
Push the memory card in until it clicks.
3
To eject the memory card:
Locate the memory card slot on the top
1
back side of the Pocket Memo.
Press the memory card into the Pocket
2
Memo until it clicks.
Release the memory card. It will slightly
3
emerge from the memory card slot. Simply
slide it out.
User manual
D Note
If the Pocket Memo is turned to the
position and there is no memory card inserted,
a warning screen is displayed.
3.4
Format a new memory card
When a new, unformatted memory card (or a
memory card that was formatted with a non-
Pocket Memo device) is inserted, the Pocket
Memo will display a prompt to format the
memory card.
To confirm and start the formatting process,
1
press the
smart button.
OK
Delete all:
Yes - format
!! ATTENTION !!
OK
To cancel the formatting process, remove
2
the memory card or press the
smart button.
Delete all:
Yes - format
!! ATTENTION !!
OK
D Note
Formatting is not possible if the memory card is
in read-only mode (locked).
ON
CANCEL
CANCEL
CANCEL
9