Setup Options - Festool SYSLITE KAL II Notice D'utilisation D'origine

Masquer les pouces Voir aussi pour SYSLITE KAL II:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
6.7

Setup options

Attachment handle [1-3]
The folding attachment handle allows
you to hang the device from scaffolding
or similar structures.
If you decide to power the device
with an external Festool battery
pack, the attachment handle
must be detached before­
hand [2A].
Setup angle
The working light can be set up in three
different angles [3].
Tripod
A standard photographic tripod with
UNC 1/4"-20 thread can be attached to
the threaded tripod socket [2-1].
Magnetic foot with spherical head (part
accessories) [4]
Strong magnetic fields
may damage or destroy
electronic or mechani­
cal elements and devices. The same al­
so applies to cardiac pacemakers. The
required safety distances can be found
in the manuals of these devices.
Risk of pinching fingers and
hands at the magnet!
Check the area at the magnetic
foot before use and clean if nec­
essary.
Only use the magnetic foot for securing
the Festool working light using one of
the options described below:
Screw on magnetic foot at the tripod
socket [2-1]. This can be rotated in all
directions by loosening the clamping
screw [4-1].
Secure the magnetic foot using one of
three options:
[4A] Secure with a clamp
[4B] Magnetic mounting at the
screwed-on adapter plate
[4C] Magnetic mounting with the
adapter plate screwed to its
stand
7
Service and maintenance
Customer service and re­
pairs must only be carried
out by the manufacturer
or service workshops.
Find the nearest address
at: www.festool.co.uk/service
Always use original
EKAT
4
Festool spare parts. Order
no. at: www.festool.co.uk/
5
3
2
service
1
Always clean the plastic cover on
the working light using a soft, dry
cloth to prevent any damage. Do not
use solvents.
Keep the contacts on the working
light and battery pack clean.
Always appoint an authorised serv­
ice workshop to replace damaged
integral batteries.
8
Environment
Prior to disposal
Remove the integral battery
from the device! Dismantle
the housing components and remove
the battery. Dispose of the battery using
our return service.
Do not dispose of electric power tools
in household waste! recycle devices,
English
15

Publicité

Table des Matières
loading

Table des Matières