Dutch originals DO-SV-BTSB2-B Manuel Utilisateur page 13

will flash blue rapidly.
• Select "DO-SV-BTSB2" from the list of found devices. After the "paired" voice
prompt, the BT connection will be successfully established and the LED Indicator
will become blue.
• If you want to connect another BT enabled audio player to the device, press the
PAIR button on the remote control to disconnect the active paired connection, until
F
you hear the voice prompt "disconnected".
• If you want to play and/or pause music on your connected BT audio player, open
your media player and press play/pause.
• To control your music, use the play, track & volume buttons on your connected BT
audio player or use the "control buttons" on the control panel of the device or remote
control.
• If a paired BT audio player is in range, it will automatically connect to the device.
Please note:
• If a PIN code is requested when making a BT connection, enter 0000.
• If there is an existing BT connection, press and hold the
on the remote control to re-activate the pairing mode. The existing connection will be
interrupted.
• If a paired BT audio player is becoming out of range, it will disconnect from the
device and you will hear the voice prompt "disconnected".
• If no other BT device pairs with the device within two minutes, the player will
restore its previous connection/mode.
Listening to music from BT enabled audio player.
You can listen to your stored music if the connected BT enabled audio player
supports Advanced Audio Distribution Profile (A2DP).
The device supports Audio Video Remote Control (AVRCP), which means you can
use the device's remote control to play music on the BT enabled audio player.
• To play music on your connected audio player, use the control buttons on your
media player.
• To play/pause music on your connected audio player, use the
the device's remote control.
• To play the next track on your connected audio player, use the
the device's remote control.
4) SPECIFICATIONS
• Power input: 220-240 Vac – 50/60Hz
• Power consumption: 30W (<0.5W in standby mode)
• Stereo speakers: 60W (2x 15W + 30W))
• Speaker resistance: 2x 4 Ω + 8 Ω
• Frequency response: 45 Hz – 20 kHz
• BT chip: V3.0
• Transmission power: class II
/PAIR button
F
/PAIR button
& button on
E
EN 11
5
/
on
F