Dutch originals DO-SV-BTSB2-B Manuel Utilisateur page 12

Volume control
• Press the volume - & + buttons
the device's remote control to adjust the volume.
• If you wish to turn the sound OFF, press the MUTE button
Press the MUTE button
volume.
• While adjusting the volume, the LED indicator
flash quickly.
• When the volume level reaches maximum, and you try to further increase it, the
LED indicator
5
• When the volume level reaches its minimum, and you try to further decrease it, the
LED indicator
5
Select a preset sound effect
While playing, press the EQ button
on the device's remote control to select the desired preset equalisers.
G
MODE selection (OPTICAL / HDMI ARC / AUX)
Make sure that the device is connected to the TV or audio device.
While the device is powered ON, press the SRC button
OPTICAL, HDMI ARC, AUX button
source mode. The LED indicator
You can operate your sound and playback features directly from your audio device.
Please note:
If there is no sound output and the LED indicator
is flashing, make sure the audio setting of the input source (e.g. TV, game console,
DVD player, etc.) is changed to "PCM" with optical and HDMI ARC output.
Making a BT connection
You will need to pair your BT enabled audio player with the device when you use it
for the first time.
• Press the SRC button
control to select BT mode. The LED Indicator
in pairing mode.
• Keep your BT enabled audio player within 1 m (3 ft) of the device during the pairing
process.
• Make your BT enabled audio player search for compatible BT devices and select
"DO-SV-BTSB2" from the list of found devices. Once successfully paired, you will
hear the voice prompt "paired" and the LED indicator
• If you cannot find the device in the list of available BT connections, you can start
the pairing process manually. Press and hold the
control. You will hear the voice prompt "pairing" from the device. The LED Indicator
EN 10
again or press the VOL+ button
B
for the selected source will flash once.
for the selected source will flash once.
5
on the device or the BT button
2
on the device, or the VOL- & VOL+ buttons
4
5
on the device, or NEWS, CINE, SONG buttons
3
on the remote control to select the desired
C
will light up in the color of the selected source.
will flash slowly. The device is now
5
on the remote control.
B
to resume normal
D
for the selected source mode will
on the device, or
2
for the selected source mode
5
on the device's remote
C
will light up blue.
5
/PAIR button
F
on
D
on the remote
5