Changing The Batteries; Using The App; Data Transfer - VISIOMED Bewell connect BW-SCB1 Mode D'emploi

Starting up
- Place the baby scale on a flat, solid surface, making sure that it
is stable and that nothing touches it. Press the «on/off» button.
- On first use, the figures flash during weighing. The baby's weight
is displayed on the screen at the same time as the word „hold". The
scale will turn off automatically. On subsequent uses, the previous
weight recorded is displayed at startup.
- To perform another weighing, remove the baby from the scale.
Press the „hold" button until the „0.00 kg" figure appears on the
screen.
- If you wish to place a towel under the baby before weighing it, put
it on the scale before turning it on. Press the "on/off" button and
place the baby on the tray when "0.00" appears on the screen. The
scale automatically performs the calculation and only displays the
baby's weight (at the same time as the word "hold").
- After weighing, remove the baby at the same time as the towel. A
negative value will appear, press "tare" to reset the scale to zero for
future weight measurements.
- When the child is able to stand, replace the baby weighing tray
with the disc.
Do not use the disc to weigh a child that cannot yet stand.
Shutdown
- The device shuts down automatically after displaying the weight
(approximately one minute).
- The device can be shut down manually by pressing the "on/off" but-
ton.

3-3. CHANGING THE BATTERIES

- The battery compartment is located at the back of the device.
- When using it for the first time, insert 2 new 1.5V LR6-AA batteries
34 BewellConnect - BW-SCB1 - User Manual - 012017
into the scale.
- When the LCD screen displays "LO", the batteries are low or used
up. Replace used batteries, taking care to observe the polarity. A
polarity error may cause damage to the device and compromise
the warranty.
- Never insert rechargeable batteries. Use single-use batteries only.
Do not mix new batteries with used batteries.
- Do not throw your used batteries out with household waste.
- Take your used batteries to a collection point.
Remove the batteries if the device is not in use for a long period, in
order to avoid any leaks that may damage the unit.

4. USING THE APP

4-1. DATA TRANSFER

Download the BewellConnect® app
Download the BewellConnect® app from your smartphone
or tablet store. (App Store for an iOS device, Play Store for
an Android device)
First use – Programming personal data
- Start by creating profiles for yourself and your children
- Customize the profiles by entering age, height and sex
Taking the measurement
- To track your child's growth, connect your device (telephone, tab-
let) using Bluetooth (Bluetooth 4.0 smart Low Energy connectivi-
ty, compatible with iPhone 4s and up).
- Turn on the scale by pressing the on/off button.
- Open the BewellConnect® app and choose your child's profile.
- Start MyBabyScale® and go to the measurement screen before
weighing your child, to save the data.
BewellConnect - BW-SCB1 - User Manual - 012017 35