Installing The Speakers On The Tallboy Stand - Samsung HT-H5500W Guide D'utilisation

Connections

Installing the Speakers on the Tallboy Stand

* HT-H5530 only - Front Speakers
1. Turn the Stand Base upside-down and connect
it to the Stand.
2. Use the driver to combine the screws on the 3
marked holes.
3. Straighten a supplied speaker wire to the gravity
direction and put in the hole on the center of
Stand Base.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert a screw clockwise into the hole on the
rear of the speaker using a screwdriver.
And then connect a speaker cable.
6. This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.
Speaker Cable Connections
1. Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle
to the colored sticker on the bottom of each speaker.
2. Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of
the speaker plugs to the colors of the speaker jacks.
1
Stand Base
Stand
3
5
10
- English
2
4
Speaker
Stand
6