Promax GV-698+ Manuel D'utilisation page 65

Colour pattern generator GV-698+
DISPLAY SELECT
With this pushbutton the display of the second line of display changes. When
the top LED is ON the information corresponds to ATTENUATOR, CHANNEL and CH-
FREQ, with the lower LED turned on the information corresponds to WSS, VPS and
PDC. The fact that you visualise one information or the other does not modify at all the
operation of the generator, since it will maintain the values selected.
Figure 6.- Display de dos líneas. Iluminación led inferior
WSS ON
Pressing this key with the LED turned on activates function WSS (Wide Screen
Signaling). This signal trips receivers that have a circuit able to detect different
signal formats. With the lower LED of DISPLAY SELECT turned on, the
information that appears in field ATTENUATOR corresponds to WSS signal.
The possibilities are OFF (LED WSS ON turned off), 16:9A, 16:9C, 16:9M,
16:9S, 14:9C, 14:9M, 14:9S, 4:3C. The choice between the different
possibilities is done with the encoder selecting first the field and then the
function.
VPS ON
When pressing this key with the LED turned on activates function VPS (Video
Program Service). With the lower LED of DISPLAY SELECT turned on, the
information that appears in field CHANNEL corresponds to the country
information. The possibilities are SPA (Spain), UK (United Kingdom), GER
(Germany) y FRA (France). Between field CHANNEL and CH-FREQ appears
the information of status STA (Start), STO (Stop) and PAU (Pause). In field
CH_FREQ the time in minutes of the programming of signal VPS appears. The
possibilities are 1m and 5m. The information of month (1), day (1) and hour (1)
is fixed. The choice between the different possibilities is done with the encoder
selecting first the field and then the function.
07/2018 Page 21