Installation; Power Requirements - Promax GV-698+ Manuel D'utilisation

Colour pattern generator GV-698+

3 INSTALLATION

3.1 Power requirements

This equipment requires a mains power source of 110-125-220 or 230/240 V
AC 50 to 60 Hz. Mains operating voltage can be selected at the rear panel.
1.- Pull out the fuseholder lid.
2.- Set the proper fuse for the desired mains voltage.
3.- Insert the fuseholder lid so the [ A ] pointer faces the desired mains voltage
display [ B ].
07/2018
To remove the fuseholder lid insert
a little screwdriver in the slot and
lift out.
Fuse
Fuseholder
lid
Figure 1.- Selection of mains voltage.
Page 15